Sunday, August 31, 2014

The way the service knows magic com magic jar that rice quickly stale.

Many complaints among owners of magic jar or magic com that rice quickly stale and watery. If you have this, a service is a place to complain. Yet this is not in the schools and in the course. So the only capital the courage to try the first time gets the job to deal damage to the magic jar or rice warmers. Owner complaints but quickly stale hot rice. After often deal damage like this can finally draw a conclusion that this is because the elements above that of the dead or broken lid. Maswar Service will share the experience to handle this kind of damage here and there in order not to unload proved futile and a waste of time.

Here are the steps that need to be done:

1 Open the rear cover hinge linking the body with a lid.

2 Use the hook and pull out the close connections that exist in the hole that is already open. There are two connections / groups.

3 Separate the wires on one of the group, so that the cord does not converge anymore.

4 Measure the AVO meter, one of the plug insert the cable clamps to touch the metal, and the other plug wires attach to the elements that have been separated earlier. Oh yes, almost forgot, posikan AVO meter on ohms scale. Based on experience, most of the time measured above elements, the needle does not move, which means the element is damaged. it should be the replacement. If the top element is provided, continue the next step.

5. Pull the bottom of the inside of the lid, and remove the part where it attaches element.

6 When can we see the elements, remove the cord from the clamp and remove the adhesive from the aluminum plate attached elements, and clean the remnants of the adhesive.

7 Install the new element in place and clamp the cable back in its original place.

NOTE: Open little by little paper do not immediately open it, because if the wrong position and already attached difficult to be addressed.

8 Once a new element is installed, position as before. So the work has been completed. The working principle elements of magic jar lid or magic com.
Let us discuss a little about the functions and working principles of the elements of the upper lid. When the rice is warmed, then no evaporation and water droplets collect in the upper part. Elements are without power on will turn it into heat, and capable of drying the water droplets and if the top element is not working, then the water droplets will accumulate and drip back into the rice, and this is what causes rapid stale rice and watery.

No comments:

Post a Comment